Baking soda is one of the best household products that can be used for lots of things including increasing the alkalinity of the pool.

But can you shock pool after adding baking soda?

Yes, you can shock pool after adding baking soda because baking soda is a safe household product that balances the pH level.

But filter out all baking soda before you start shocking your pool.

Baking soda is nothing but sodium bicarbonate,

which balances the pH level and alkalinity of the pool water.

And before you shock your pool with chlorine, it’s really important to balance the pH level and alkalinity of the pool water.

In this article, We will discuss how to shock your pool after adding baking soda, how long should you wait and what are precautions you need to take in this process.

Also Read: Can You Shock Pool After Adding Calcium?

Chlorine Shock and Baking Soda

As you know chlorine shock is really important for your pool for keeping it clean, and safe.

But if you have added baking soda to balance the alkalinity and pH level in your pool water and now you wanted to shock your pool then it’s safe.

Usually mixing any chemicals with chlorine can cause toxic fumes but this is not the case with baking soda and chlorine.

Baking soda is sodium bicarbonate and mixing this with chlorine does not cause any chemical reaction.

In fact, when you mix baking soda and chlorine then it increases the cleaning property of both products.

But do not forget to wear your safety gear before you mix these chemicals or shock your pool.

Can You Mix Baking Soda and Chlorine for Cleaning a Pool?

Although mixing baking soda and chlorine can create a strong cleaning solution but it’s not recommended to mix these products for cleaning your pool.

So when you are shocking your pool then make sure you filter out all baking soda from your pool before you start chlorine shock.

And before you shock your pool, make sure you check the pool water with perfect balance of pH level and alkalinity.

How Long to Wait For Shock After Adding Baking Soda?

Once you add baking soda to your pool water, let the baking soda completely dissolve into the water and let the pool pump circulate and filter the baking soda for the next 5 to 6 hours.

After 5 to 6 hours, test the pool water and shock your pool.

Can you Shock Pool After Adding Baking Soda?

Yes, it’s safe to chlorine shock your pool after adding baking soda but you must filter out all baking soda from your pool,

Before you add chlorine shock to your pool.

Mixing both baking soda and chlorine may be safe but it’s not recommended to clean your pool by mixing them both.

So always filter out all baking soda before you shock your pool.

Things You Need to Do Before Shocking Your Pool.

Here are things you need to remember before you shock your pool

1. Always Use Your safety Gears

It doesn’t matter how safe the chemical is but you should always use your safety goggles, safety gloves, and other gear before you do anything.

Because you don’t want to harm yourself with these products.

Because mixing certain chemicals may cause toxic fumes.

So always take precautions first, 

Always wear your safety gear first, before you do anything.

2. Test Your Pool Water

Before you add baking soda to your pool water, always test your pool water.

Because you need to know exactly how much pH level and alkalinity you need to increase before you add baking soda.

Depending upon the measurements, you can add baking soda to your pool water.

3. Add Baking Soda and wait 

Once you know how much baking soda you need to add for increasing the alkalinity and pH level of pool water,

Then you can add baking soda but you don’t need to add too much baking soda into pool water.

Adding a small amount of baking soda can do the job.

And now wait for baking soda to completely dissolve into your pool water.

Meanwhile, run the pool pump circulates and filter it for the next five to six hours.

4. Test Your Water Again

Once you added baking soda, then wait until it completely dissolved into the water and there must be no signs of cloudiness.

Once you see baking soda is completely dissolved then,

You need to test your pool water again to check the alkalinity and pH level balance.

5. Add Chlorine Shock and test 

Now, once you test the pool water and all the chemicals in the pool are balanced then you can shock your pool with chlorine.

Once you shock your pool then run the pump and filter run for the next 24 hours.

Once the 24-hour is completed then you can test your pool water again to check the balance of all chemicals in your pool.

Will Baking Soda Lower the Chlorine Level In the Pool?

No, Baking soda does not lower the chlorine levels in your pool water but baking soda increases the alkalinity and pH level of your pool water.

And when baking soda increases the pH level and alkalinity then chlorine levels in your pool will work more effectively.

Final Words

If you want to shock your pool after adding baking soda then you should wait until baking soda completely dissolved into your water.

And remaining baking soda can be filtered out using a pump filter.

When the pump circulate and filters out the baking soda in the next 5 to 6 hours, then you can test the water again,

And then you can shock the pool.

If you have any questions regarding shocking your pool with baking soda then you can ask them in the comment section of this article.